Most fences in North Texas don't fail because of the pickets. They fail at the posts. Our clay swells when it's wet and shrinks and cracks in summer, which pushes posts out of line, and wet soil rots wood posts right at the ground.
Wood posts
Pressure-treated wood posts are the cheapest option and look natural. In DFW they commonly start to rot or lean in 8–12 years, sooner in low, wet spots or where sprinklers hit the fence line.
Galvanized steel posts
Steel posts set in concrete don't rot, don't twist and hold their line through the clay's seasonal movement. They usually add only a few dollars per foot, and they're the most common reason a cedar fence stays straight for 20 years.
What we recommend
- Steel posts for any new privacy fence you plan to keep more than 10 years.
- Steel-framed gates for anything wider than 5 feet.
- A rot board along the bottom so pickets don't sit in the dirt.
- Keep sprinklers off the fence to slow rot and staining.
Frequently asked questions
Will I see steel posts?
On a standard privacy fence the steel posts sit behind the pickets and are hidden from the outside. On the inside you can wrap them in cedar or leave them showing.
How deep should fence posts be?
A good rule is about a third of the post in the ground for a 6 ft fence, set in concrete. Gate posts go deeper and use more concrete.
Can you put steel posts on my existing fence?
Often, yes. If the pickets and rails are in good shape we can replace failed wood posts with steel and re-hang the sections.